Patricia León-Pérez, Thorsten Opel, Georg Puchas, Nico Langhof, Ralf Goller, Stefan Schaff?ner und Dietmar Koch
Effect of the fibre volume content on the machinability and surface integrity in grinding C/C-SiC composites
Journal of the European Ceramic Society 45, 117173 (2025)
PDF | BibTeX | RIS | DOI

Daniel Vollprecht, Simon Faul, Romy Wittum Wittum, Lena Putz und Christian Strakos
Mobilit?t und Immobilisierung von Schwermetallen in MVA-Rostaschen
BHM Berg- und Hüttenm?nnische Monatshefte , (im Druck)
BibTeX | RIS | DOI

Judith Moosburger-Will
On the interaction between the carbon fiber surface and the epoxy resin matrix in carbon fiber reinforced polymers
Habilitation, Universit?t Augsburg (2025)
PDF | BibTeX | RIS

Raja Bade, Beate Gebert, Larisa Tsarkova, Thomas Bahners, Jochen S. Gutmann, Dietmar Koch, M. Mangir Murshed und J?rg Müssig
Towards coupling agent-free composites made from regenerated cellulose/HDPE by UV radiation-induced cross-linking
Composite Interfaces , (im Druck)
BibTeX | RIS | DOI

Manikanda Priya Prakasan, Tobias Schneider und Dietmar Koch
Understanding the gas phase formation of silicon carbide during reactive melt infiltration of carbon substrates
Open Ceramics 22, 100767 (2025)
PDF | BibTeX | RIS | DOI

Michaela Janowski, Katrin Bock, Judith Moosburger‐Will und Dietmar Koch
Fracture of all‐oxide ceramic composites: crack path analysis by surface strain monitoring
International Journal of Applied Ceramic Technology 21, 2663-2670 (2024)
PDF | BibTeX | RIS | DOI

Marco Pelanconi, Samuele Bottacin, Giovanni Bianchi, Dietmar Koch, Paolo Colombo und Alberto Ortona
High‐strength Si–SiC lattices prepared by powder bed fusion, infiltration‐pyrolysis, and reactive silicon infiltration
Journal of the American Ceramic Society 107, 4436-4450 (2024)
PDF | BibTeX | RIS | DOI

Emine Bakan, Dapeng Zhou, Daniel E. Mack, Dietmar Koch und Robert Va?en
Plasma sprayed duplex ytterbium disilicate/monosilicate EBCs and the transformation from ytterbia to ytterbium monosilicate during burner rig testing
Corrosion Science 235, 112174 (2024)
PDF | BibTeX | RIS | DOI

Christina Baumeister, Thomas Schlech, Marcel Achzet, Quy Raven Luong, Florian F. Linscheid, Bastian Brück und Markus G. R. Sause
Akustische ?berwachung des Werkzeugverschlei?es bei der zerspanenden Bearbeitung
in: SCHALL 2023: Entwicklung und Anwendung der Schallemissionsanalyse und Zustandsüberwachung mit geführten Wellen, 21./22. M?rz 2023, Wetzlar, (DGZfP - Deutsche Gesellschaft für Zerst?rungsfreie Prüfung e.V.: Berlin, 2023)
PDF | BibTeX | RIS | URL

Tobias Lehnert
Digitalisierung der Herstellungskette von CC-SiC durch den Einsatz künstlicher Intelligenz
Dissertation, Universit?t Augsburg (2023)
PDF | BibTeX | RIS

Tobias Lehnert, Bernhard Heidenreich und Dietmar Koch
Investigation of process influences on the amount of single-fiber siliconization in C/C–SiC samples by machine-learning methods
Open Ceramics 15, 100383 (2023)
PDF | BibTeX | RIS | DOI

Samet Kurt, Thomas Bratzdrum, Alexander Chaloupka, Siegfried Horn und Judith Moosburger-Will
Isothermal anionic polymerization of ε‐caprolactam to polyamide‐6: kinetic modeling and application for production process
Journal of Applied Polymer Science 140, e54320 (2023)
PDF | BibTeX | RIS | DOI

Lars Wietschel, Florian Halter, Andrea Thorenz, Denny Schüppel und Dietmar Koch
Literature review on the state of the art of the circular economy of Ceramic Matrix Composites
Open Ceramics 14, 100357 (2023)
PDF | BibTeX | RIS | DOI

Laura Silvestroni, Antonio Vinci, Nicola Gilli, Luca Zoli, Diletta Sciti, Dietmar Koch und Marius Kütemeyer
Melt/solid interaction and melt super-saturation effect on the microstructure asset of ultra-refractory composites prepared by reactive melting infiltration
Journal of Alloys and Compounds 947, 169521 (2023)
BibTeX | RIS | DOI

Simon Unseld, Ralf Goller und Dietmar Koch
Principles and approaches for the machining simulation of ceramic matrix composites at microscale: a review and outlook
Open Ceramics 16, 100454 (2023)
PDF | BibTeX | RIS | DOI

Neraj Jain
Development of a digital manufacturing process chain for ceramic composites
Dissertation, Universit?t Augsburg (2022)
PDF | BibTeX | RIS

Eva Laukmanis, Michaela Janowski, Siegfried Horn und Judith Moosburger-Will
Effect of the interplay between fiber surface chemistry and sizing reactivity on fiber matrix interaction in carbon fiber reinforced epoxy resin
Composite Interfaces 29, 1325-1355 (2022)
BibTeX | RIS | DOI

Yuan Shi, Fabia Sü?, Jürgen Horvath, Dietmar Koch und Kamen Tushtev
Evaluation of mechanical properties of a dense SiC/SiCN composite produced via PIP process
Journal of the European Ceramic Society 42, 775-785 (2022)
BibTeX | RIS | DOI

Yuan Shi, Shuguang Li, Elena Sitnikova, Daniel Cepli und Dietmar Koch
Experimental evaluation and theoretical prediction of elastic properties and failure of C/C‐SiC composite
International Journal of Applied Ceramic Technology 19, 7-21 (2022)
PDF | BibTeX | RIS | DOI

Denny Schüppel, Florian Halter, T. Schneider, Lars Wietschel, Andrea Thorenz, Alex Tuma und Dietmar Koch
Green carbon / carbon with CVI – possible or not?
in: ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, volume 6 – Life Cycle Assessment, hrsg. von Anastasios P. Vassilopoulos, Véronique Michaud, 314-322 (EPFL Lausanne, Composite Construction Laboratory: Lausanne, 2022)
PDF | BibTeX | RIS | DOI

Tobias Schneider, Lars Wietschel, Denny Schüppel, Jonas Riesner, Kevin Konrad, Andrea Thorenz, Axel Tuma und Dietmar Koch
Multicriteria optimization as enabler for Sustainable Ceramic Matrix Composites
International Journal of Applied Ceramic Technology 19, 3247-3254 (2022)
PDF | BibTeX | RIS | DOI

Walter E.C. Pritzkow, Frank Wehner und Dietmar Koch
Oxide fiber reinforced oxide ceramic matrix composite – an alternative to metallic alloys at high temperature
in: Encyclopedia of materials: metals and alloys, volume 1, hrsg. von Francisca G. Caballero, 425-441 (Elsevier: Amsterdam, 2022)
BibTeX | RIS | DOI

Matthias Rutzen, Michael Schulz, Judith Moosburger-Will, Philipp Lauff, Oliver Fischer und Dirk Volkmer
3D printing as an automated manufacturing method for a carbon fiber-reinforced cementitious composite with outstanding flexural strength (105?N/mm2)
Materials and Structures 54, 234 (2021)
PDF | BibTeX | RIS | DOI

Yuan Shi, Fiona Kessel, Martin Friess, Neraj Jain und Kamen Tushtev
Characterization and modeling of tensile properties of continuous fiber reinforced C/C-SiC composite at high temperatures
Journal of the European Ceramic Society 41, 3061-3071 (2021)
BibTeX | RIS | DOI

Samet Kurt, Jonas Maier, Robert Horny, Siegfried R. Horn, Dietmar Koch und Judith Moosburger-Will
Determination of the residual monomer concentration of ε‐caprolactam in polyamide‐6 using thermogravimetric analysis coupled with Fourier transform infrared spectroscopy gas analysis
Journal of Applied Polymer Science 138, 50730 (2021)
PDF | BibTeX | RIS | DOI

Michael Schulz
Einfluss der Faser-Matrix-Anbindung auf die Ausbildung der Mikrorissstruktur bei der Herstellung von keramischen Faserverbundwerkstoffen im Flüssigsilizierverfahren
Dissertation, Universit?t Augsburg (2021)
PDF | BibTeX | RIS

Pietro Galizia, Diletta Sciti und Neraj Jain
Insight into microstructure and flexural strength of ultra-high temperature ceramics enriched SICARBON? composite
Materials & Design 208, 109888 (2021)
PDF | BibTeX | RIS | DOI

Samet Kurt
Kalorimetrische und rheologische Untersuchung der anionischen Polymerisation von ε-Caprolactam zu Polyamid-6
Dissertation, Universit?t Augsburg (2021)
PDF | BibTeX | RIS

Bernd Mainzer, Chaorong Lin, Martin Frie?, Ralf Riedel, Johann Riesch, Alexander Feichtmayer, Maximilian Fuhr, Jürgen Almanst?tter und Dietmar Koch
Novel ceramic matrix composites with tungsten and molybdenum fiber reinforcement
Journal of the European Ceramic Society 41, 3030-3036 (2021)
BibTeX | RIS | DOI

Nannan Song, Matthew Jackson, Chris Montgomery, Shenghua Wu, Neraj Jain, Rebekah Sweat und Flavio Souza
Using multiscale modeling to advance industrial and research applications of advanced materials
International Journal for Multiscale Computational Engineering 19, 57-75 (2021)
BibTeX | RIS | DOI

Emine Bakan, Daniel E. Mack, Sandra Lobe, Dietmar Koch und Robert Va?en
An investigation on burner rig testing of environmental barrier coatings for aerospace applications
Journal of the European Ceramic Society 40, 6236-6240 (2020)
BibTeX | RIS | DOI

Veronika Stahl, Yuan Shi, Werner Kraft, Tim Lanz, Peter Vetter, Raouf Jemmali, Fiona Kessel und Dietmar Koch
C/C‐SiC component for metallic phase change materials
International Journal of Applied Ceramic Technology 17, 2040-2050 (2020)
PDF | BibTeX | RIS | DOI

M. Winkler, Peter Lunkenheimer, Alois Loidl, S.-H. Park, B. R?ska und M. Hoelzel
Charge transport by global protonic conductivity and relaxational dynamics over hydrogen bonds in Fe2+Fe3+3.2(Mn2+,Zn)0.8(PO4)3(OH)4.2(HOH)0.8
Solid State Ionics 347, 115240 (2020)
PDF | BibTeX | RIS | DOI

Sandrine H?nig, Fabia Sü?, Neraj Jain, Raouf Jemmali, Thomas Behrendt, Bernd Mainzer und Dietmar Koch
Evaluation of preparation and combustion rig tests of an effusive cooled SiC/SiCN panel
International Journal of Applied Ceramic Technology 17, 1562-1573 (2020)
PDF | BibTeX | RIS | DOI

V. Felea, P. T. Cong, Lilian Prodan, D. I. Gorbunov, T. Nomura, Y. Skourski, S. Zherlitsyn, J. Wosnitza, Zhaosheng Wang, A. Miyata, O. Portugall, Sebastian Widmann, Hans-Albrecht Krug von Nidda, Joachim Deisenhofer, Vladimir Tsurkan und Alois Loidl
High-field phase transitions in the orbitally ordered multiferroic GeV4S8
Physical Review B 101, 064413 (2020)
PDF | BibTeX | RIS | DOI

A. Sahasrabudhe, D. A. S. Kaib, Stephan Reschke, R. German, T. C. Koethe, J. Buhot, Dmytro Kamenskyi, C. Hickey, P. Becker, Vladimir Tsurkan, Alois Loidl, S. H. Do, K. Y. Choi, M. Grüninger, S. M. Winter, Zhe Wang, R. Valentí und P. H. M. van Loosdrecht
High-field quantum disordered state in α?RuCl3: spin flips, bound states, and multiparticle continuum
Physical Review B 101, 140410(R) (2020)
PDF | BibTeX | RIS | DOI

R. Sayyadi, F. Khodabakhshi, N. Shahamat Javid und G. Khatibi
Influence of graphene content and nickel decoration on the microstructural and mechanical characteristics of the Cu/Sn–Ag–Cu/Cu soldered joint
Journal of Materials Research and Technology 9, 8953-8970 (2020)
PDF | BibTeX | RIS | DOI

Judith Moosburger-Will, Michael Greisel, Michael Schulz, Mario L?ffler, Wolfgang M. Mueller und Siegfried R. Horn
Investigation of the fiber-matrix interaction in carbon fiber-reinforced polyether ether ketone by cyclic single fiber push-out and push-back tests
Composite Interfaces 27, 227-247 (2020)
BibTeX | RIS | DOI

Bernhard Heidenreich, Nathan Bamsey, Yuan Shi, Miguel Such-Taboada und Dietmar Koch
Manufacture and test of C/C–SiC sandwich structures
CEAS Space Journal 12, 73-84 (2020)
BibTeX | RIS | DOI

P. S. Stelzer, B. Plank und Z. Major
Mesostructural simulation of discontinuous prepreg platelet based carbon fibre sheet moulding compounds informed by X-ray computed tomography
Nondestructive Testing and Evaluation 35, 342-358 (2020)
BibTeX | RIS | DOI

P. Wahl, U. R. Singh, Vladimir Tsurkan und Alois Loidl
Nanoscale electronic inhomogeneity in FeSe0.4Te0.6 revealed through unsupervised machine learning
Physical Review B 101, 115112 (2020)
PDF | BibTeX | RIS | DOI

K. L. Ngai, Peter Lunkenheimer und Alois Loidl
Predicting the α-relaxation time of glycerol confined in 1.16 nm pores of zeolitic imidazolate frameworks
Physical Chemistry Chemical Physics 22, 507-511 (2020)
PDF | BibTeX | RIS | DOI

Neraj Jain und Dietmar Koch
Prediction of failure in ceramic matrix composites using damage-based failure criterion
Journal of Composites Science 4, 183 (2020)
PDF | BibTeX | RIS | DOI

Antonio Vinci, Luca Zoli, Pietro Galizia, Marius Kütemeyer, Dietmar Koch, Martin Frie? und Diletta Sciti
Reactive melt infiltration of carbon fibre reinforced ZrB2/B composites with Zr2Cu
Composites Part A: Applied Science and Manufacturing 137, 105973 (2020)
BibTeX | RIS | DOI

A. Miyata, H. Suwa, T. Nomura, Lilian Prodan, V. Felea, Y. Skourski, Joachim Deisenhofer, Hans-Albrecht Krug von Nidda, O. Portugall, S. Zherlitsyn, Vladimir Tsurkan, J. Wosnitza und Alois Loidl
Spin-lattice coupling in a ferrimagnetic spinel: exotic H?T phase diagram of MnCr2S4 up to 110 T
Physical Review B 101, 054432 (2020)
PDF | BibTeX | RIS | DOI

D. Croitori, I. Filippova, V. Kravtsov, A. Günther, S. Widmann, D. Reuter, Hans-Albrecht Krug von Nidda, Joachim Deisenhofer, Alois Loidl und Vladimir Tsurkan
Structure, superconductivity, and magnetism in Rb1?xFe1.6Se2?zSz
Physical Review B 101, 054516 (2020)
PDF | BibTeX | RIS | DOI

Sebastian Emmert
Terahertzspektroskopie an plastischen Kristallen
Dissertation, Universit?t Augsburg (Verlag Dr. Hut: München, 2020)
BibTeX | RIS

Michael Filipenko, Alexander Poeppel, Alwin Hoffmann, Wolfgang Reif, Andreas Monden und Markus G. R. Sause
Virtual commissioning with mixed reality for next-generation robot-based mechanical component testing
in: ISR 2020: 52th International Symposium on Robotics in conjunction with: automatica December 9 – 10, 2020, Online-Event, 1-6 (VDE: Berlin, 2020)
PDF | BibTeX | RIS | URL | URL

Markus G. R. Sause, Stefan Schmitt, Birte Hoeck und Andreas Monden
Acoustic emission based prediction of local stress exposure
Composites Science and Technology 173, 90-98 (2019)
PDF | BibTeX | RIS | DOI

Ramakrishna Aluru, Haibiao Zhou, Antoine Essig, J.-Ph. Reid, Vladimir Tsurkan, Alois Loidl, Joachim Deisenhofer und Peter Wahl
Atomic-scale coexistence of short-range magnetic order and superconductivity in Fe1+ySe0.1Te0.9
Physical Review Materials 3, 084805 (2019)
PDF | BibTeX | RIS | DOI

Markus G. R. Sause, Stefan Schmitt, Birte Hoeck und Andreas Monden
Berstdruckvorhersage mittels Schallemissionsanalyse
in: DACH-Jahrestagung 2019: Zerst?rungsfreie Materialprüfung, 27. - 29. Mai 2019, Friedrichshafen, (Deutsche Gesellschaft für Zerst?rungsfreie Prüfung (DGZfP): Berlin, 2019)
PDF | BibTeX | RIS | URL

Tanja K. Schneck, Bastian Brück, Michael Schulz, Johanna M. Sp?rl, Frank Hermanutz, Bernd Clau?, Wolfgang M. Mueller, Bernhard Heidenreich, Dietmar Koch, Siegfried R. Horn und Michael R. Buchmeiser
Carbon fiber surface modification for tailored fiber-matrix adhesion in the manufacture of C/C-SiC composites
Composites Part A: Applied Science and Manufacturing 120, 64-72 (2019)
BibTeX | RIS | DOI

Patrick Gutmann, Judith Moosburger-Will, Samet Kurt, Yinqiao Xu und Siegfried R. Horn
Carbonization of polyacrylonitrile-based fibers under defined tensile load: influence on shrinkage behavior, microstructure, and mechanical properties
Polymer Degradation and Stability 163, 174-184 (2019)
PDF | BibTeX | RIS | DOI

Bernd Mainzer, Chaorong Lin, Raouf Jemmali, Martin Frie?, Ralf Riedel und Dietmar Koch
Characterization and application of a novel low viscosity polysilazane for the manufacture of C- and SiC-fiber reinforced SiCN ceramic matrix composites by PIP process
Journal of the European Ceramic Society 39, 212-221 (2019)
BibTeX | RIS | DOI

Neraj Jain, Marvin Kosin, Yuan Shi und Dietmar Koch
Characterization and modeling of transverse micro‐cracking during pyrolysis process of carbon fiber reinforced plastics
International Journal of Applied Ceramic Technology 16, 1734-1743 (2019)
BibTeX | RIS | DOI

Yuan Shi, Achim Neubrand und Dietmar Koch
Characterization of hardness and stiffness of ceramic matrix composites through instrumented indentation test
Advanced Engineering Materials 21, 1800806 (2019)
BibTeX | RIS | DOI

Alexander Ruff, Peter Lunkenheim